Atmel Corporation
Products > Space Rad Hard ICs > Application Notes

Space Rad Hard ICs -

right arrow Application Example and Algorithms   right arrow Design Considerations
 
PDF Software Description
 
Annulled Cycle Management on the TSC695 SPARC Processor (6 pages, updated 02/04)
The aim of this application note is to provide TSC695 users with an overview of the annulled cycle management on the TSC695 processor.
 
AT40K Series Configuration (41 pages, updated 3/02)
Configuration is the process by which a design is loaded into an AT40K/AT40KAL series FPGA. AT40K/AT40KAL series devices are SRAM based and can be configured any number of times.
 
EDAC Testing Injection of Correctable and Uncorrectable Errors (8 pages, updated 12/03)
This application note describes how to test the TSC695 trap mechanism when the EDAC is enabled.
 
Radiation Tolerant SRAM for SPACE Applications
 
Single Point-to-Point IEEE 1355 High-Speed Controller: Unused (Non Connect) Pin to be Externally Con (2 pages, updated 11/02)
 
Trap Generation Under EDAC and Parity Protection (9 pages, updated 12/03)
This application note describes the trap mechanisms used by the TSC695 processor when accessing memory areas that are protected by EDAC and parity.
 
Triple Point-to-Point IEEE 1355 High-Speed Controller: Unused (Non Connect) Pins to be Externally Co (2 pages, updated 11/02)
Top
Application Example and Algorithms
PDF Software Description
 
Applicability of TSC695F Application Notes or Errata Sheet to ERC32 Chipset (2 pages, revision D, updated 07/06)
 
AT697 PCI System Controller Capability (16 pages, revision A, updated 8/08)
The aim of this document is to provide AT697 users a functional example of the AT697 PCI system controller capability. This application note describes the PCI mechanism handled by the AT697 through the use of a bootloader retrieving from an Ethernet BOOTP/TFTP server an IP address and a file to load into RAM.
Checking TSC695 Code for Occurrence of FCMPxx/IUop/STDF Instruction Sequence (4 pages, revision B, updated 09/06)
This application note provides TSC695 users with a description of the procedure to check their code for potential occurrence of specific FCMPxx/IUop (1)/STDF instruction sequence.
Top
Design Considerations
PDF Software Description
Checking AT697E Code Occurrence of LDF/FPOPd Sequence w. dependency on an Odd-Numbered Register (5 pages, revision A, updated 5/08)
This application note provides AT697E users with a description of the procedure to check their code for potential occurrence of a specific instructions sequence.
Top