Automotive AVR |
|
|
| ATtiny167 Automotive |
The ATtiny167 provides the following features: 16K byte of In-System Programmable Flash, 512 bytes EEPROM, 512 bytes SRAM, 6 general purpose I/O lines, 32 general purpose working reg-isters, one 8-bit Timer/Counter with compare modes, one 8-bit high speed Timer/Counter, Universal Serial Interface, a LIN controller, Internal and External Interrupts, a 4-channel, 10-bit ADC, a programmable Watchdog Timer with internal Oscillator, and three software selectable power saving modes. |
| ATtiny24 Automotive |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
See datasheet for automotive ordering codes.
8KB version: ATtiny84 Automotive
4KB version: ATtiny44 Automotive
Note: All of our kits use industrial product versions. |
| ATtiny25 Automotive |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. Two 8-bit timer/counters with PWM and prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
See datasheet for automotive ordering codes.
4KB version: ATtiny45 Automotive
8KB version: ATtiny85 Automotive
Note: all our kits are using industrial product versions. |
| ATtiny261 Automotive |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
4KB version: ATtiny461 Automotive
8KB version: ATtiny861 Automotive |
| ATtiny44 Automotive |
4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
See datasheet for automotive ordering codes.
8KB version: ATtiny84 Automotive
2KB version: ATtiny24 Automotive
Note: All of our kits use industrial product versions. |
| ATtiny45 Automotive |
4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. Two 8-bit timer/counters with PWM and prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
See datasheet for automotive ordering codes.
2KB version: ATtiny25 Automotive
8KB version: ATtiny85 Automotive
Note: all our kits are using industrial product versions. |
| ATtiny461 Automotive |
4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
2KB version: ATtiny261 Automotive
8KB version: ATtiny861 Automotive |
| ATtiny84 Automotive |
8K Bytes of In-System Self-Programmable Flash, 512 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
See datasheet for automotive ordering codes.
4KB version: ATtiny44 Automotive
2KB version: ATtiny24 Automotive
Note: All of our kits use industrial product versions. |
| ATtiny85 Automotive |
8K Bytes of In-System Self-Programmable Flash, 512 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. Two 8-bit timer/counters with PWM and prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
See datasheet for automotive ordering codes.
2KB version: ATtiny25 Automotive
4KB version: ATtiny45 Automotive
Note: all our kits are using industrial product versions. |
| ATtiny861 Automotive |
8K Bytes of In-System Self-Programmable Flash, 512 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
2KB version: ATtiny261 Automotive
4KB version: ATtiny461 Automotive |
| ATtiny87 Automotive |
The ATtiny87 provides the following features: 8K byte of In-System Programmable Flash, 512 bytes EEPROM, 512 bytes SRAM, 6 general purpose I/O lines, 32 general purpose working reg-isters, one 8-bit Timer/Counter with compare modes, one 8-bit high speed Timer/Counter, Universal Serial Interface, a LIN controller, Internal and External Interrupts, a 4-channel, 10-bit ADC, a programmable Watchdog Timer with internal Oscillator, and three software selectable power saving modes. |
| ATtiny88 Automotive |
picoPower technology AVR Microcontroller.
8K Bytes of In-System Self-Programmable Flash, 64 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. 8-bit timer/counter and 16-bit timer/counter with PWM, 10-bit ADC, SPI-Serial Peripheral Interface. debugWIRE for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 V operation.
Note: all our kits are using industrial product versions.
Industrial Version
ATtiny88
|
| ATmega48 Automotive |
4K byte self-programming Flash Program Memory, 512 byte SRAM, 256 Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 16 MIPS throughput at 16 MHz.
See datasheet for automotive ordering codes.
8Kbyte version: ATmega88 Automotive
16Kbyte version: ATmega168 Automotive
Note: all our kits are using industrial product versions.
Industrial Versions
ATmega48
ATmega88
ATmega168
|
| ATmega88 Automotive |
8K byte self-programming Flash Program Memory, 1K Byte SRAM, 256 Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 16 MIPS throughput at 16 MHz.
See datasheet for automotive ordering codes.
4Kbyte version: ATmega48 Automotive
16Kbyte version: ATmega168 Automotive
Note: all our kits are using industrial product versions.
Industrial Versions
ATmega48
ATmega88
ATmega168
|
| ATmega168 Automotive |
16K byte self-programming Flash Program Memory, 512 byte SRAM, 256 Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 16 MIPS throughput at 16 MHz.
See datasheet for automotive ordering codes.
4Kbyte version: ATmega48 Automotive
8Kbyte version: ATmega88 Automotive
Note: all our kits are using industrial product versions.
Industrial Versions
ATmega48
ATmega88
ATmega168
|
| AT90CAN128 Automotive |
8-bit AVR Microcontroller with 128K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial and Automotive applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation.
See datasheet for automotive ordering codes.
Note: all our kits are using industrial product versions.
Industrial Version: AT90CAN128
Certificate: CAN Conformance by C&S
|
| AT90CAN32 Automotive |
8-bit AVR Microcontroller with 32K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial and Automotive applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation.
See datasheet for automotive ordering codes.
Note: all our kits are using industrial product versions.
Industrial Version: AT90CAN32
Certificate: CAN Conformance by C&S
|
| AT90CAN64 Automotive |
8-bit AVR Microcontroller with 64K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial and Automotive applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation.
See datasheet for automotive ordering codes.
Note: all our kits are using industrial product versions.
Industrial Version: AT90CAN64
Certificate: CAN Conformance by C&S
|
| ATmega32C1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega32M1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, Power Stage Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega64C1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega64M1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, Power Stage Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega164P Automotive |
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512-Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt Operation.
See datasheet for automotive ordering codes.
32KB version: ATmega324P Automotive
64KB version: ATmega644P Automotive
Note: all our kits are using industrial product versions.
|
| ATmega328P Automotive |
picoPower technology AVR Microcontroller.
32K Byte self-programming Flash Program Memory, 2K Byte SRAM, 1K Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 16 MIPS throughput at 16 MHz.
Note: all our kits are using industrial product versions.
Industrial Version
ATmega328P
|
| ATmega169P Automotive |
picoPower technology AVR Microcontroller.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt Operation. |
| ATmega324P automotive |
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt Operation.
See datasheet for automotive ordering codes.
16KB version: ATmega164P Automotive
64KB version: ATmega644P Automotive
Note: all our kits are using industrial product versions. |
| ATmega644P Automotive |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt Operation.
See datasheet for automotive ordering codes.
16KB version: ATmega164P Automotive
32KB version: ATmega324P Automotive
Note: all our kits are using industrial product versions. |
AVR Z-Link |
|
|
| ATmega64RZAPV |
MCU Wireless chipset for IEEE 802.15.4 and ZigBee applications.
The ATmega64RZAPV is a bundle of ATmega644P AVR and AT86RF230 radio.
|
| ATmega64RZAV |
MCU Wireless chipset for IEEE 802.15.4 and ZigBee applications.
The ATmega64RZAV is a bundle of ATmega644 AVR and AT86RF230 radio. |
| ATmega128RZAV |
MCU Wireless chipset for IEEE 802.15.4 and ZigBee applications.
The ATmega128RZAV is a bundle of ATmega1281 AVR MCU and AT86RF230 radio. |
| ATmega128RZBV |
MCU Wireless chipset for IEEE 802.15.4 and ZigBee applications.
The ATmega128RZBV is a bundle of ATmega1280 AVR and AT86RF230 radio. |
| ATmega256RZAV |
MCU Wireless chipset for IEEE 802.15.4 and ZigBee applications.
The ATmega256RZAV is a bundle of ATmega2561 AVR and AT86RF230 radio. |
| ATmega256RZBV |
MCU Wireless chipset for IEEE 802.15.4 and ZigBee applications.
The ATmega256RZBV is a bundle of ATmega2560 AVR and AT86RF230 radio. |
Battery Management AVR |
|
|
| ATmega16HVA |
16-Kbyte self-programming Flash Program Memory, 512-Bytes SRAM, 256-Bytes EEPROM, 1 or 2 cells in series, Over-current, High-current and Short-circuit protection, 12-bit Voltage ADC, 18-bit Coulomb Counter Current ADC, debugWire interface for on-chip debug. Up to 4 MIPS throughput at 4 MHz. 1.8 - 9 Volt Operation.
8 KB version: ATmega8HVA |
| ATmega16HVB |
16-Kbyte self-programming Flash Program Memory, 1KBytes SRAM, 512-Bytes EEPROM, 2,3 or 4 cells in series, Over-current, High-current and Short-circuit protection, 12-bit Voltage ADC, 18-bit Coulomb Counter Current ADC, debugWire interface for on-chip debug. Up to 8 MIPS throughput at 8 MHz. 4 - 25 Volt Operation.
32 KB version: ATmega32HVB |
| ATmega32HVB |
32-Kbyte self-programming Flash Program Memory, 2KBytes SRAM, 1KBytes EEPROM, 2,3 or 4 cells in series, Over-current, High-current and Short-circuit protection, 12-bit Voltage ADC, 18-bit Coulomb Counter Current ADC, debugWire interface for on-chip debug. Up to 8 MIPS throughput at 8 MHz. 4 - 25 Volt Operation.
16 KB version: ATmega16HVB |
| ATmega406 |
40-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 512-Byte EEPROM, up to 4 Battery Cells in series, Cell balancing, Under-voltage protection, Over-current and Short-circuit protection, 12-bit Voltage ADC, Coulomb Counter Current measurement, SM-bus interfae, JTAG interface for on-chip debug. Up to 1 MIPS throughput at 1 MHz. 4 - 25 Volt Operation. |
| ATmega8HVA |
8-Kbyte self-programming Flash Program Memory, 512-Bytes SRAM, 256-Bytes EEPROM, 1 or 2 cells in series, Over-current, High-current and Short-circuit protection, 12-bit Voltage ADC, 18-bit Coulomb Counter Current ADC, debugWire interface for on-chip debug. Up to 4 MIPS throughput at 4 MHz. 1.8 - 9 Volt Operation.
16 KB version: ATmega16HVA |
CAN AVR |
|
|
| AT90CAN128 |
8-bit AVR Microcontroller with 128K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial and Automotive applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation.
Automotive Version:
AT90CAN128 Automotive
Certificate: CAN Conformance by C&S |
| AT90CAN32 |
8-bit AVR Microcontroller with 32K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation.
Automotive Version:
AT90CAN32 Automotive
Certificate: CAN Conformance by C&S |
| AT90CAN64 |
8-bit AVR Microcontroller with 64K Bytes of ISP Flash and CAN Controller. V2.0A and V2.0B standard compliant, the CAN controller handles independent message objects programmable on-the-fly. Perfectly suited for Industrial applications, the microcontroller support CANopen, DeviceNet™ and OSEK™ implementation.
Automotive Version:
AT90CAN64 Automotive
Certificate: CAN Conformance by C&S |
| ATmega16M1 |
8-bit AVR Microcontroller with 16-KByte of ISP Flash, 1-KByte SRAM, 512-Byte EEPROM, CAN V2.0A/B Controller with 6 message objects, LIN 2.1 and 1.3 Controller. Up to 11 Channel 10-bit A/D-converter. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
32 KB Version: ATmega32M1
64 KB Version: ATmega64M1
|
| ATmega32C1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega32M1 |
8-bit AVR Microcontroller with 32-KByte of ISP Flash, 2-KByte SRAM, 1-KByte EEPROM, CAN V2.0A/B Controller with 6 message objects, LIN 2.1 and 1.3 Controller. Up to 11 Channel 10-bit A/D-converter. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
16 KB Version: ATmega16M1
64 KB Version: ATmega64M1
|
| ATmega32M1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, Power Stage Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega64C1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
| ATmega64M1 |
8-bit AVR Microcontroller with 64-KByte of ISP Flash, 4-KByte SRAM, 2-KByte EEPROM, CAN V2.0A/B Controller with 6 message objects, LIN 2.1 and 1.3 Controller. Up to 11 Channel 10-bit A/D-converter. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
16 KB Version: ATmega16M1
32 KB Version: ATmega32M1
|
| ATmega64M1 Automotive |
8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, Power Stage Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
|
LCD AVR |
|
|
| ATmega3290P |
picoPower technology AVR Microcontroller.
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 40 Segment LCD Driver. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
64-pin version: ATmega329P |
| ATmega329P |
picoPower technology AVR Microcontroller.
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
100-pin version: ATmega3290P
|
| ATmega169P |
picoPower technology AVR Microcontroller.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation. |
| ATmega329 |
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
100-pin version: ATmega3290
64KB/64-pin version: ATmega649
64KB/100-pin version: ATmega6490 |
| ATmega3290 |
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 40 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64-pin version: ATmega329
64KB/64-pin version: ATmega649
64KB/100-pin version: ATmega6490 |
| ATmega649 |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
100-pin version: ATmega6490
32KB/64-pin version: ATmega329
32KB/100-pin version: ATmega3290 |
| ATmega6490 |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 40 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64-pin version: ATmega649
32KB/64-pin version: ATmega329
32KB/100-pin version: ATmega3290 |
Lighting AVR |
|
|
| AT90PWM1 |
Specially designed for Lamp ballast and Motor Control applications, the AT90PWM1 AVR microcontroller features 8 KBytes Flash memory, 7-channel advanced PWM, 8-channel 8-bit ADC, two 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement.
|
| AT90PWM2 |
Specially designed for Lamp ballast and Motor Control applications, the AT90PWM2 AVR microcontroller features 8 KBytes Flash memory, 7-channel advanced PWM, 8-channel 8-bit ADC, two or three 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement and DALI protocol support.
AT90PWM2B is the latest version and is reccommended for all new designs.
|
| AT90PWM216 |
Specially designed for Lamp ballast applications, the AT90PWM216 AVR microcontroller features 16 Kbytes Flash memory, 7-channel advanced PWM, 8-channel 10-bit ADC, a 10-bit DAC, two or three 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement and DALI protocol support. |
| AT90PWM2B |
Specially designed for Lamp ballast and Motor Control applications, the AT90PWM2B AVR microcontroller features 8 KBytes Flash memory, 7-channel advanced PWM, 8-channel 8-bit ADC, two or three 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement and DALI protocol support.
|
| AT90PWM3 |
Specially designed for Lamp ballast and Motor Control applications, the AT90PWM3 AVR microcontroller features 8 Kbytes Flash memory, 10-channel advanced PWM, 11-channel 8-bit ADC, a 10-bit DAC, two or three 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement and DALI protocol support.
AT90PWM3B is the latest product version and must be used for all new designs. |
| AT90PWM316 |
Specially designed for Lamp ballast and Motor Control applications, the AT90PWM316 AVR microcontroller features 16 Kbytes Flash memory, 10-channel advanced PWM, 11-channel 10-bit ADC, a 10-bit DAC, three 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement and DALI protocol support. |
| AT90PWM3B |
Specially designed for Lamp ballast and Motor Control applications, the AT90PWM3B AVR microcontroller features 8 Kbytes Flash memory, 10-channel advanced PWM, 11-channel 8-bit ADC, a 10-bit DAC, two or three 12-bit High Speed PSC (Power Stage Controllers) with 4-bit Resolution Enhancement and DALI protocol support. |
megaAVR |
|
|
| ATmega1284P |
picoPower technology AVR Microcontroller.
128K Bytes self-programming Flash Program Memory, 16K Bytes SRAM, 4K Bytes EEPROM, two 16-bit Timer/Counters, two 8-bit Timer/Counters, Real Time Counter, 8 Channel 10-bit A/D-converter(TQFP/MLF). JTAG Interface for On-chip Debug. Up to 20 MIPS throughput at 20 MHz.
|
| ATmega48PA |
picoPower technology AVR Microcontroller.
4K byte self-programming Flash Program Memory, 512 byte SRAM, 256 Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP and QFN/MLF). debugWIRE On-chip Debug System. Up to 20 MIPS throughput at 20 MHz.
8Kbyte version: ATmega88PA
16Kbyte version: ATmega168PA
32Kbyte version: ATmega328P
|
| ATmega8A |
8-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 6 or 8 Channel 10-bit A/D-converter. Up to 16 MIPS throughput at 16 Mhz. 2.7 - 5.5 Volt operation. |
| ATmega88PA |
picoPower technology AVR Microcontroller.
8K Byte self-programming Flash Program Memory, 1K Byte SRAM, 512 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 20 MIPS throughput at 20 MHz.
4Kbyte version: ATmega48PA
16Kbyte version: ATmega168PA
32Kbyte version: ATmega328P
|
| ATmega8515 |
8-Kbyte self-programming Flash Program Memory, 544 Byte internal + up to 64 Kbyte external SRAM, 512 Byte EEPROM. Up to 16 MIPS throughput at 16 Mhz. 2.7 - 5.5 Volt operation. |
| ATmega8535 |
8-Kbyte self-programming Flash Program Memory, 544 Byte SRAM, 512 Byte EEPROM, 8-channel 10-bit A/D Converter. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega16A |
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz. 2.7 - 5.5 Volt operation. |
| ATmega162 |
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt operation. |
| ATmega164P |
picoPower technology AVR Microcontroller.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512-Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
32KB version: ATmega324P
64KB version: ATmega644P
|
| ATmega165P |
picoPower technology AVR Microcontroller.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt operation. |
| ATmega168PA |
picoPower technology AVR Microcontroller.
16K Byte self-programming Flash Program Memory, 1K Byte SRAM, 512 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 20 MIPS throughput at 20 MHz.
4Kbyte version: ATmega48PA
8Kbyte version: ATmega88PA
32Kbyte version: ATmega328P
|
| ATmega328P |
picoPower technology AVR Microcontroller.
32K Byte self-programming Flash Program Memory, 2K Byte SRAM, 1K Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 20 MIPS throughput at 20 MHz.
4Kbyte version: ATmega48PA
8Kbyte version: ATmega88PA
16Kbyte version: ATmega168PA
|
| ATmega32A |
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz. 2.7 - 5.5 Volt operation. |
| ATmega164PA |
picoPower technology AVR Microcontroller.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512-Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
32KB version: ATmega324PA
64KB version: ATmega644P |
| ATmega324P |
picoPower technology AVR Microcontroller.
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
16KB version: ATmega164P
64KB version: ATmega644P
|
| ATmega324PA |
picoPower technology AVR Microcontroller.
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
16KB version: ATmega164PA
64KB version: ATmega644P |
| ATmega644PA |
picoPower technology AVR Microcontroller.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
16KB version: ATmega164PA
32KB version: ATmega644PA |
| ATmega325 |
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
100-pin version: ATmega3250
64KB/64-pin version: ATmega645
64KB/100-pin version: ATmega6450 |
| ATmega325P |
picoPower technology AVR Microcontroller.
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
100-pin version: ATmega3250P |
| ATmega3250 |
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64-pin version: ATmega325
64KB/64-pin version: ATmega645
64KB/100-pin version: ATmega6450 |
| ATmega3250P |
picoPower technology AVR Microcontroller.
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
64-pin version: ATmega325P |
| ATmega644 |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation. |
| ATmega644P |
picoPower technology AVR Microcontroller.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 Volt Operation.
16KB version: ATmega164P
32KB version: ATmega324P
|
| ATmega64 |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz. 2.7 - 5.5 Volt operation. |
| ATmega64A |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz. 2.7 - 5.5 Volt operation. |
| ATmega645 |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
100-pin version: ATmega6450
32KB/64-pin version: ATmega325
32KB/100-pin version: ATmega3250 |
| ATmega6450 |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64-pin version: ATmega645
32KB/64-pin version: ATmega325
32KB/100-pin version: ATmega3250 |
| ATmega640 |
64-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-KByte EEPROM, 16 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
128KB/64-pin version: ATmega1281
128KB/100-pin version: ATmega1280
256KB/64-pin version: ATmega2561
256KB/100-pin version: ATmega2560
|
| ATmega128A |
128-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega1281 |
128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64KB/100-pin version: ATmega640
128KB/100-pin version: ATmega1280
256KB/64-pin version: ATmega2561
256KB/100-pin version: ATmega2560
|
| ATmega1280 |
128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-KByte EEPROM, 16 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64KB/100-pin version: ATmega640
128KB/64-pin version: ATmega1281
256KB/64-pin version: ATmega2561
256KB/100-pin version: ATmega2560
|
| ATmega2561 |
256-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64KB/100-pin version: ATmega640
128KB/64-pin version: ATmega1281
128KB/100-pin version: ATmega1280
256KB/100-pin version: ATmega2560
|
| ATmega2560 |
256-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-KByte EEPROM, 16 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 1.8 - 5.5 Volt Operation.
64KB/100-pin version: ATmega640
128KB/64-pin version: ATmega1281
128KB/100-pin version: ATmega1280
256KB/64-pin version: ATmega2561
|
tinyAVR |
|
|
| ATtiny10 |
1K Bytes of In-System Programmable Flash, 32 Bytes Internal SRAM. One 16-bit Timer/Counter with PWM channels, 8-bit ADC, Analog Comparator. Up to 12 MIPS throughput at 12 MHz. 1.8 - 5.5 V operation.
1K version without ADC: ATtiny9
512 Bytes version: ATtiny5
512 Bytes version without ADC: ATtiny4 |
| ATtiny12 |
1-Kbyte In-System programmable Flash Program Memory, 32 byte SRAM, 64 Byte EEPROM, Up to 8 MIPS throughput at 8 Mhz.
Not recommended for new designs |
| ATtiny13A |
picoPower technology AVR Microcontroller.
1-Kbyte In-System programmable Flash Program Memory, 64-Byte SRAM, 64-Byte EEPROM, 32-Byte Register File, 4-channel 10-bit A/D, Up to 20 MIPS throughput at 20 MHz. |
| ATtiny2313 |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. USI--Universal Serial Interface, Full Duplex UART. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. |
| ATtiny24 |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
8KB version: ATtiny84
4KB version: ATtiny44A |
| ATtiny24A |
picoPower technology AVR Microcontroller.
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5V operation.
4KB version: ATtiny44A |
| ATtiny25 |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. Two 8-bit timer/counters with PWM and prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
8KB version: ATtiny85
4KB version: ATtiny45
Automotive Versions
ATtiny25 Auto,
ATtiny45 Auto,
ATtiny85 Auto
|
| ATtiny261A |
2K Bytes of In-System Self-Programmable Flash, 128 Bytes In-System Programmable EEPROM, 128 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
4KB version: ATtiny461A
8KB version: ATtiny861A
Automotive Version: ATtiny261 Automotive
|
| ATtiny28L |
2K Flash Program Memory, 32 bytes register file, Keyboard interrupt, high-current LED driver, Analog Comparator. Up to 4 MIPS throughput at 4 MHz. |
| ATtiny4 |
512 Bytes of In-System Programmable Flash, 32 Bytes Internal SRAM. One 16-bit Timer/Counter with PWM channels, Analog Comparator. Up to 12 MIPS throughput at 12 MHz. 1.8 - 5.5 V operation.
1KB version with ADC: ATtiny10
1KB version: ATtiny9
512 Bytes version with ADC: ATtiny5 |
| ATtiny43U |
Ultra low voltage device for portable and other battery operated applications.
Integrated boost converter automatically generates a stable 3V supply voltage from a low voltage battery input down to 0.7V.
4-Kbyte In-System programmable Flash Program Memory, 256-Byte SRAM, 64-Byte EEPROM, 32-Byte Register File, Two 8-bit Timer/Counters with PWM channels, 4-channel 10-bit A/D, Analog Comparator, Temperature Sensor, USI-Universal Serial Interface, and debugWIRE for on-chip-debug. Up to 1 MIPS throughput per MHz. |
| ATtiny44A |
picoPower technology AVR Microcontroller.
4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5V operation. |
| ATtiny45 |
4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. Two 8-bit timer/counters with PWM and prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
8KB version: ATtiny85
2KB version: ATtiny25
Automotive Versions
ATtiny25 Auto,
ATtiny45 Auto,
ATtiny85 Auto
|
| ATtiny461A |
4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
2KB version: ATtiny261A
8KB version: ATtiny861A
Automotive Version: ATtiny461 Automotive
|
| ATtiny48 |
picoPower technology AVR Microcontroller.
4K Bytes of In-System Self-Programmable Flash, 64 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. 8-bit timer/counter and 16-bit timer/counter with PWM, 10-bit ADC, SPI-Serial Peripheral Interface. debugWIRE for on-chip-debug. Up to 12 MIPS throughput at 12 MHz. 1.8 - 5.5 V operation.
8KB version: ATtiny88
|
| ATtiny5 |
512 Bytes of In-System Programmable Flash, 32 Bytes Internal SRAM. One 16-bit Timer/Counter with PWM channels, 8-bit ADC, Analog Comparator. Up to 12 MIPS throughput at 12 MHz. 1.8 - 5.5 V operation.
1KB version: ATtiny10
1KB version without ADC: ATtiny9
512 Bytes version without ADC: ATtiny4 |
| ATtiny84 |
8K Bytes of In-System Self-Programmable Flash, 512 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. 8-bit and 16-bit timer/counters with PWM, 10-bit ADC, USI-Universal Serial Interface, On-chip Temperature Sensor. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
4KB version: ATtiny44A
2KB version: ATtiny24 |
| ATtiny85 |
8K Bytes of In-System Self-Programmable Flash, 512 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. Two 8-bit timer/counters with PWM and prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
4KB version: ATtiny45
2KB version: ATtiny25
Automotive Versions
ATtiny25 Auto,
ATtiny45 Auto,
ATtiny85 Auto
|
| ATtiny861A |
8K Bytes of In-System Self-Programmable Flash, 512 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
2KB version: ATtiny261A
4KB version: ATtiny461A
Automotive Version: ATtiny861 Automotive
|
| ATtiny88 |
picoPower technology AVR Microcontroller.
8K Bytes of In-System Self-Programmable Flash, 64 Bytes In-System Programmable EEPROM, 512 Bytes Internal SRAM. 8-bit timer/counter and 16-bit timer/counter with PWM, 10-bit ADC, SPI-Serial Peripheral Interface. debugWIRE for on-chip-debug. Up to 12 MIPS throughput at 12 MHz. 1.8 - 5.5 V operation.
4KB version: ATtiny48
|
| ATtiny9 |
1K Bytes of In-System Programmable Flash, 32 Bytes Internal SRAM. One 16-bit Timer/Counter with PWM channels, Analog Comparator. Up to 12 MIPS throughput at 12 MHz. 1.8 - 5.5 V operation.
1KB version with ADC: ATtiny10
512 Bytes version with ADC: ATtiny5
512 Bytes version: ATtiny4 |
USB AVR |
|
|
| AT90USB1286 |
USB Function Microcontroller.
128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| AT90USB1287 |
USB On-The-Go (OTG) Microcontroller.
128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| AT90USB162 |
USB Microcontroller.
16-Kbyte self-programming Flash Program Memory, 512-byte SRAM, 512-byte EEPROM. DebugWire interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| AT90USB646 |
USB Function Microcontroller.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| AT90USB647 |
USB On-The-Go (OTG) Microcontroller.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| AT90USB82 |
USB Microcontroller.
8-Kbyte self-programming Flash Program Memory, 512-byte SRAM, 512-byte EEPROM. DebugWire interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega16U2 |
USB Microcontroller.
16-Kbyte self-programming Flash Program Memory, 512-byte SRAM, 512-byte EEPROM. DebugWire interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega16U4 |
16-Kbytes of In-System Programmable Flash, 1-Kbyte EEPROM, 2.5-Kbytes SRAM, USB 2.0 Full-speed/Low Speed Device Module. High-speed PWMs, 12-channel 10-bit ADC. JTAG test interface.
Up to 16 MIPS Throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega32U2 |
USB Microcontroller.
32-Kbyte self-programming Flash Program Memory, 1024-byte SRAM, 1024-byte EEPROM. DebugWire interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega32U4 |
32-Kbytes of In-System Programmable Flash, 1-Kbyte EEPROM, 2.5-Kbytes SRAM, USB 2.0 Full-speed/Low Speed Device Module. High-speed PWMs, 12-channel 10-bit ADC. JTAG test interface.
Up to 16 MIPS Throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
| ATmega8U2 |
USB Microcontroller.
8-Kbyte self-programming Flash Program Memory, 512-byte SRAM, 512-byte EEPROM. DebugWire interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
XMEGA |
|
|
| ATxmega128A1 |
128K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 8K Byte SRAM, and 2K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega128A3 |
128K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 8K Byte SRAM, and 2K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega128A4 |
128K Byte self-programming Flash Program Memory, 4K Byte Boot Code section, 8K Byte SRAM, and 2K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega16A4 |
16K Byte self-programming Flash Program Memory, 4K Byte Boot Code section, 2K Byte SRAM, and 1K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega192A1 |
192K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 16K Byte SRAM, and 4K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega192A3 |
192K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 16K Byte SRAM, and 4K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega256A1 |
256K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 16K Byte SRAM, and 4K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega256A3 |
256K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 16K Byte SRAM, and 4K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega256A3B |
256K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 16K Byte SRAM, and 4K Bytes EEPROM. Battery Backup System, 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega32A4 |
32K Byte self-programming Flash Program Memory, 4K Byte Boot Code section, 4K Byte SRAM, and 1K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega384A1 |
384K Byte self-programming Flash Program Memory, 8K Byte Boot Code section, 32K Byte SRAM, and 4K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega64A1 |
64K Byte self-programming Flash Program Memory, 4K Byte Boot Code section, 4K Byte SRAM, and 2K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega64A3 |
64K Byte self-programming Flash Program Memory, 4K Byte Boot Code section, 4K Byte SRAM, and 2K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
| ATxmega64A4 |
64K Byte self-programming Flash Program Memory, 4K Byte Boot Code section, 4K Byte SRAM, and 2K Bytes EEPROM. 4-channel DMA controller, 8-channel Event System, and Up to 32 MIPS throughput at 32 MHz.
12-bit ADC, 12-bit DAC and analog comparators. AES and DES crypto engines, 16-bit Timer Counters, USART, SPI, and TWI.
|
Touch Solutions
