 General |
| Products and Prices |
| |
|
| Posted |
FAQ |
| 01/24/05 |
Can I use AT17Fxxx - Atmel Flash Configurators to replace Platform Flash/PROMS from Xilinx ? |
| 12/21/04 |
Using an Atmel AT17FxxxA Configurator to Configure an Altera Stratix FPGA |
| 08/30/04 |
What is the difference between 'A' and 'non A' parts? for example AT17C/LV512A vs AT17C/LV512. |
| 08/30/04 |
Does the multiplexer mandatory for the ISP of the AT17 65K, 128K and 256K EEPROMs? |
| 04/23/02 |
How many times can the AT17 series EEPROMs be reprogrammed? |
| 04/23/02 |
How many years data retention can Atmel AT17 series EEPROM have ? |
| 04/12/02 |
Deivce ID error on lot # 082512A of the AT17C65 |
| 04/12/02 |
Deivce ID error on lot #9D0323C of the AT17C65A |
| 04/04/02 |
What is the Junction temperature of Atmel AT17 series EEPROM ? |
| 04/01/02 |
Can an irregular clock signal be used? |
| 04/01/02 |
Can I program cascaded multiple device in-system? |
| 04/01/02 |
Can I use /CE pin to select between multiple devices during in-system programming? |
| 04/01/02 |
Can I use the data input line as an I/O after configuration has been completed? |
| 04/01/02 |
How can I use the 512K, 1M and 2M part's Ready pin during configuration? |
| 04/01/02 |
How do I enable or disable the internal oscillator of the AT17C/LV512(A) , AT17C/LV010(A), and AT17C/LV002(A) ? |
| 04/01/02 |
How do I recover from an aborted Write or Read instruction? |
| 04/01/02 |
How do I use the WP input pins? |
| 04/01/02 |
Is there a change notification system whereby any future changes in the information you have supplied are communicated automatically? |
| 04/01/02 |
Is this passivation on all device of the same package style across all of Atmel's product lines? |
| 04/01/02 |
The white label on the back of ATDH2200 programming board has the following label: 5450-11-1198 and 190132. Does this version of the programmer board support the AT17C/LV020(A)? |
| 04/01/02 |
What is the lead material used for the referenced part? Does the same material used for all the parts? |
| 04/01/02 |
What is the material of the plastic package? |
| 04/01/02 |
Who controls the ACK bit? |
| 07/26/01 |
Question regarding to Atmel AT17LV020A or AT17LV002A EEPROM in Altera 20K200E applications |
| 07/13/01 |
UL testing |
| 04/25/01 |
When does |
| 04/18/01 |
I can perform in-system programming (ISP) without any problem using the 10-pin ribbon cable of the ATDH2200E programming kit, but I got the expecting 1 but found 0 errers in CPS when I use the ATDH2225 ISP direct download cable. |
| 04/16/01 |
After I installed the latest version of CPS software to my PC running on Windows 2000 system, it didn't work. Please advice. |
| 04/16/01 |
Do you have an IBIS model for AT17LV010 EEPROM ? |
| 04/16/01 |
How do I order ATDH2200E/ATDH2225 and AT17XXX(A) EEPROMs (Atmel product) ? |
| 04/16/01 |
I have some AT17XXX parts worked with one lot code number, but it didn't work with another lot code number using the same programming procedure and same equipment. What shall I do about it? |
| 04/16/01 |
What is the MTBF data for the AT17LV010-10JC EEPROM ? |
| 04/16/01 |
Why the AT17LVXXX EEPROM can be programmed at 5.0V, but it failed in 3.3V setting when using the ATDH2200 porgramming board ? |
| 04/12/01 |
A pin that is connected to the Reset of the configuration EEPROM can be used as a general output after configuration. If the data from the EEPROM is ignored, what impact might there be from constantly resetting the device? |
| 04/12/01 |
After a failed instruction to the EEPROM, it no longer produces a clock signal during configuration -- even after being fully programmed and verified by a 3rd party programmer. |
| 04/12/01 |
Can I access the 'spare' memory inside the AT17C/LVxxx devices after the FPGA has loaded? |
| 04/12/01 |
Can I cascade multiple devcies? |
| 04/12/01 |
Can I run the CPS under WinNT? |
| 04/12/01 |
Can I write any number of bytes at a time? |
| 04/12/01 |
Can we keep keys attached to the parallel port? |
| 04/12/01 |
Can you further clarify how the different read operations work during programming mode? |
| 04/12/01 |
Configuration of an EPF8K from an AT17C128 fails when the clock powers up high. Is this an issue that has been fixed? |
| 04/12/01 |
Do all vendors of FPGA serial programming support devices use the same device pin-outs? |
| 04/12/01 |
Do I have to power cycle in order to program the device after reading the MFR. ID and Device ID? |
| 04/12/01 |
Do you have any existing parts that are reported to have ESD leakage current problem? |
| 04/12/01 |
Does Atmel make configurators that meet military temperature specifications? |
| 04/12/01 |
Does the AT17C/LVxxx support a soft reset after programming? |
| 04/12/01 |
How can I automate the setting of the reset polarity on the DATA I/O Unisite so I don't have to enter the reset polarity data bits every time? |
| 04/12/01 |
How do I use CPS? |
| 04/12/01 |
I am programming AT17C256 devices in system and some of the data is always programmed to a logic 1, even though my data contains both logic 0 and logic 1. |
| 04/12/01 |
I am receiving a ACK_SENSE error. What is wrong? |
| 04/12/01 |
I am using the CF software but it does not support the part I want to use. |
| 04/12/01 |
I have correctly selected the device algorithm and visually verified the inserted part, yet I am still getting a Device ID error. Why? |
| 04/12/01 |
I want to cascade two Atmel AT17C/LVxxx devices together, but they don't seem to work after I have programmed them on a Data I/O Unisite - what am I doing wrong? |
| 04/12/01 |
I want to use Atmel's ISP FPGA configuration memories, but I have a questions that I didn't see an answer to here - where can I go for support? |
| 04/12/01 |
I want to use Atmel's ISP FPGA configuration memories, but I have a questions that I didn't see an answer to here - where can I go for support? |
| 04/12/01 |
I wish to program a low density (65K/128K/256K) part in-system using an industry standard programmer. |
| 04/12/01 |
If the STOP bit is asserted during an unacknowledged write poll, does the EEPROM abort the current Write operation? |
| 04/12/01 |
In your data sheet, Vih is specified as 2.0v min, however, your programming specification says Vcc*0.7, which works out to 3.5V. If the latter is true, does this mean that the 5V parts cannot reliably interface with 3.3V FPGAs? |
| 04/12/01 |
Instead of using the write polling method of communicating with the EEPROM, can I set up a delay in my programming routine? |
| 04/12/01 |
Is there a common package for migration to larger density devices so I can simplify my cascaded serials at a later date? |
| 04/12/01 |
It seems like AT17C010 doesn't have its internal clock generation circuitry disabled? |
| 04/12/01 |
Number of layers of passivation used within the device and the material used per layer (1st layer being that layer on top of the silicon itself)? |
| 04/12/01 |
The AT17LV010 programs and verifies ok but it stops sending data partway through FPGA configuration. A device ID error is reported by my programmer corresponding to 001E 0037. |
| 04/12/01 |
The bst file read back from the device is larger than the bst file originally written. |
| 04/12/01 |
The first byte of the EEPROM comes out corrupted. Why? |
| 04/12/01 |
The reset polarity does not seem to be set after programming what could be wrong? |
| 04/12/01 |
The reset polarity is incorrect when my power-up time spans 20-30ms. |
| 04/12/01 |
We have some A part EEPROMs, which does not provide the clock signal during configuration. We tested another parts with different date code, but they worked ok. Is there anything wrong with these parts? |
| 04/12/01 |
What can I use for file conversions and partitioning? |
| 04/12/01 |
What form does the BST file format take on? |
| 04/12/01 |
What is the die size and gate density (transistor QTY) of AT17LV512? |
| 04/12/01 |
What is the difference between ATDH2200 and ATDH2200E? |
| 04/12/01 |
What is the max. current drawn from the parts? |
| 04/12/01 |
What is the state of the EEPROM prior to programming? Is it possible to initialize an EEPROM to a known state without a bitstream file? |
| 04/12/01 |
What occurs during power-on-reset or when I take my device out of reset? |
| 04/12/01 |
When I try to program the AT17C512-10JC EEPROM using a BP 1200 programmer (third party programmer), I got the device ID error. Do you have a solution to solve this problem? |
| 04/12/01 |
Where can I get a sample to try out? |
| 04/12/01 |
Which output bitstream file format do I use to program the configurator when targetting AT40K FPGAs? |
| Products and Prices |
| Posted |
FAQ |
| 01/21/09 |
Low Cost Configurator Family AT18Fxxx |
| General |
| Posted |
FAQ |
| 04/13/06 |
Programming related issue for AT17F series device |
| 04/13/06 |
Using Atmel AT17 configurators with Altera Cyclone-II FPGA |
