Atmel Media Support
Products > AVRŽ 8-Bit RISC > Product Card
ATtiny13A
: :
picoPower technology AVR Microcontroller.
1-Kbyte In-System programmable Flash Program Memory, 64-Byte SRAM, 64-Byte EEPROM, 32-Byte Register File, 4-channel 10-bit A/D, Up to 20 MIPS throughput at 20 MHz.
Flash (Kbytes) 1
EEPROM (Kbytes) 0.0625
SRAM (Bytes) 64B + 32 reg
Max I/O Pins 6
F.max (MHz) 20
Vcc (V) 1.8-5.5
   PDIP 8
 SOIC (150mil) 8
 SOIC (208mil) 8
 MLF (WQFN) 20
 MLF (VDFN) 10
More
View Related Documents and Tools
Distributor InventoryCheck Distributor Inventory
:
ATtiny13A Summary (20 pages, revision C, updated 9/09)
ATtiny13A (172 pages, revision C, updated 9/09)
 
:
AVR077: Opto Isolated Emulation for the DebugWIRE (9 pages, revision A, updated 1/08)
This application note describes how to implement an optoisolated interface for the DebugWIRE. This device could help the debug of applications with non isolated power supply like ballast, motors, vacuum cleaners, refrigerators, etc.
AVR040: EMC Design Considerations (18 pages, revision D, updated 6/06)
This Application Note covers the most common EMC problems designers encounter when using Microcontrollers.
AVR042: AVR Hardware Design Considerations (14 pages, revision F, updated 4/08)
This Application Note covers the most common problems encountered when switching to a new microcontroller architecture like the AVR. Solutions and considerations for the most common design challenges are covered.
AVR000: Register and Bit-Name Definitions for the AVR Microcontroller (2 pages, revision C, updated 11/09)
This Application Note contains files which allow the user to use Register and Bit names from the databook when writing assembly programs.
AVR030: Getting Started with IAR Embedded Workbench for Atmel AVR (10 pages, revision D, updated 10/04)
The purpose of this application note is to guide new users through the initial settings of IAR Embedded Workbench, and compile a simple C-program.
AVR031: Getting Started with ImageCraft C for AVR (8 pages, revision B, updated 5/02)
The purpose of this Application Note is to guide new users through the initial settings of the ImageCraft IDE and compile a simple C program.
  Other Related Application Notes
  
:
Debug Tool: AVR Dragon
AVR JTAGICE mkII
Design Software: AVR Studio 4
Development Kit: ATAKSTK511
Emulator: Mature ATICE40
Mature ATICE50
In-System Programming: AVR ISP In-System Programmer
AVRISP mkII In-System Programmer
Starter Kit: ATSTK500
ATSTK600
ATSTK600-DIP
Software Files: AVR IBIS - Tiny files
Zip archive with IBIS files for Atmel AVR Tiny devices.
 
:
AVR Dragon
AVR JTAGICE mkII
See more FAQs
  
:
8-bit Microcontroller Drives Battery-powered Thermostat (Article, 2 pages, updated 1/04)
Algorithm Builder for AVR (Article, 2 pages, updated 1/04)
Atmel AVR-based Constant Current Supply (Article, 4 pages, updated 1/04)
AVR and AVR32 - Quick Reference Guide (Overview, 68 pages, revision I, updated 5/09)
Introduction of the product range of AVR and AVR32 microcontrollers and application processors:
  • Device family description
  • Key features
  • Device selection guides
  • Application oriented device families
  • Tools offer
AVR Instruction Set (User Guide, 155 pages, revision H, updated 7/09)
Heterogeneous Device Networking (Article, 2 pages, updated 1/04)
High-level Tool Targeted for AVR Controllers (Article, 2 pages, updated 1/04)