Atmel Corporation
Products > RF Identification > Tools & Software

RF Identification -

right arrowDevelopment Board   right arrowDevelopment Software
right arrowDevelopment Kit    
      right arrowSoftware Files
Development Board
RFID Dev. Board ATAB5570 for Sensor Application The ATA5570 is based on the ATA5567 but enlarged by an additional sensor input. The board is equipped with a switchable sensor resistor. Depending on the impedance, the memory data of the tag will be sent in inverse or in non-inverse mode. The board design is also suitable to test other tag versions in SO8 packages.
Top
Development Kit
LF RFID Application Kit ATA2270-EK1 This LF demonstration kit provides a completely self-contained means to begin using RFID systems, even for users with very little prior RFID experience. It supplies an LCD and control buttons to enable interaction with the RFID system. This stand-alone system supports the e5530/TK5530, T5551/TK5551, ATA5567(T5557), ATA5570, ATA5577, ATA5558 IDIC®s and U2270 from Atmel. The included source code and reference designs allow a complete system-level design to be evaluated and prototyped in the shortest amount of time using the building blocks provided in this kit. This kit is supported by all the standard AVR development tools such as AVR Studio®, STK500, JTAGICE mkII, etc. For more in-depth evaluation purposes, the TMEB8704 or ATAK2270 is recommended.
LF RFID Application Kit ATAK2270 The LF-RFID kit is provided to demonstrate the key features of the various RFID products. The included software supports the following products: U2270B, TK5530/e5530, TK5551, TK552/T5552, T5557/ATA5567, ATA5570, ATA5577. Within the ATA5577 selection there is a special menu to read and program tags according ISO 11784/85 standard. The kit contains samples, a CD-ROM containing the installation software, product documentation, and all necessary accessories.
LF RFID Demonstration Kit TMEB8704 The LF RFID kit is available to demonstrate the key features of various RFID products. The included software supports the following products: U2270B, TK5530/e5530, TK5551, TK5561, TK552/T5552, T5557 Comp. Mode. The kit contains samples, a CD-ROM with installation software and product documentation, as well as all accessories needed.
LF RFID Upgrade Kit ATAK2270-UG This kit upgrades the TMEB8704 kit to the functionality of the ATAK2270. The upgrade kit consists of the following:
1. CD-ROM containing installation software and documentation
2. An AVR micro IC ATMEGA8515 to replace the previons microcontroller on the main board
3. Tag samples of ATA5567 in ISO card and coil
The included software supports the following RFID products: U2270B, TK5530/e5530, TK5551, TK552/T5552, T5557/ATA5567, and ATA5570.
Top
Development Software
Setup Software - LF RFID Application Kit ATAK2270 Software for development kit ATAK2270 supporting transponder and reader products. The software controls the 125-kHz RFID base station included in the kit.
Setup software 5.5 for application kit TMEB8704 Operation software for development kit TMEB8704 promoting transponder and reader products. The software controls the 125 kHz RFID base station which is part of the kit.
Software Files:
Software Description
Register to download ATA2270-EK1 PC Application v1.0.0.5 (124 KB)
Register to download Firmware ATA2270-EK1 v3.1 (53 Bytes)
RFID setup software 5.5 for application kit TMEB8704 (updated 10/03)
Setup Software for LF RFID Application Kit ATAK2270 (11 MB)
Software for development kit ATAK2270 supporting transponder and reader products. The software controls the 125-kHz RFID base station included in the kit.
Top