| Development Board |
|
|
|
ATR2406-DEV-BOARD
|
The ATR2406-DEV-BOARD is a complete RF-Module, designed to make it very easy and convenient for the user to evaluate the RF IC performance and develop custom specific applications. The RF-Module is included into the ATR2406-DEV-KIT but is also available seperately.
The Dev-Board consists of 1 RF-Module ATR2406-DEV-BOARD and 1 CD-ROM with Firmware and Manufacturing Data (Gerber-Files).
|
|
ATR2406-DEV-BOARD2
|
The ATR2406-DEV-BOARD2 is a complete long range RF-Module with the low-IF Transceiver ATR2406 and the PA-LNA frontend IC T7024.It is designed to make it very easy and convenient for the user to evaluate the RF IC performance and develop custom specific applications. The RF-Module is available seperately. It consists of 1 complete "solder-on" RF-Module (Reference Design), 1 Interfaceboard incl. SMA connector, 1 CD-ROM with sample firmware and Manufacture Data (Gerber Files)
|
| Top |
| Development Kit |
|
|
|
ATAB5423-3-WB
|
The Wireless BlackBird evaluation kit consists of two 2"x3.5" PC boards, each with one ATA542x transceiver, custom LCD display, external antenna, ISP and UART headers, miniature joystick, and 2 AA batteries. Using the two transceiver boards, a communication link can be established within seconds to easily demonstrate functions such as RSSI links, temperature and light sensoring, and frequency hopping.
The ATAB542x-x-WB kit is designed for an immediate out-of-the-box experience. Industrial or consumer system designers can discover, without any additional PC connection, the powerful capabilities of the ATA542x series when partnered with Atmel's ATmega3290.
The Wireless Blackbird evaluation kit is available in 5 different versions as designated by the following part numbers:
ATAB5423-3-WB for 315 MHz
ATAB5425-3-WB for 345 MHz
ATAB5428-4-WB for 434 MHz
ATAB5428-8-WB for 868 MHz
ATAB5429-9-WB for 915 MHz |
|
ATAB5425-3-WB
|
The Wireless BlackBird evaluation kit consists of two 2"x3.5" PC boards, each with one ATA542x transceiver, custom LCD display, external antenna, ISP and UART headers, miniature joystick, and 2 AA batteries. Using the two transceiver boards, a communication link can be established within seconds to easily demonstrate functions such as RSSI links, temperature and light sensoring, and frequency hopping.
The ATAB542x-x-WB kit is designed for an immediate out-of-the-box experience. Industrial or consumer system designers can discover, without any additional PC connection, the powerful capabilities of the ATA542x series when partnered with Atmel's ATmega3290.
The Wireless Blackbird evaluation kit is available in 5 different versions as designated by the following part numbers:
ATAB5423-3-WB for 315 MHz
ATAB5425-3-WB for 345 MHz
ATAB5428-4-WB for 434 MHz
ATAB5428-8-WB for 868 MHz
ATAB5429-9-WB for 915 MHz |
|
ATAB5428-4-WB
|
The Wireless BlackBird evaluation kit consists of two 2"x3.5" PC boards, each with one ATA542x transceiver, custom LCD display, external antenna, ISP and UART headers, miniature joystick, and 2 AA batteries. Using the two transceiver boards, a communication link can be established within seconds to easily demonstrate functions such as RSSI links, temperature and light sensoring, and frequency hopping.
The ATAB542x-x-WB kit is designed for an immediate out-of-the-box experience. Industrial or consumer system designers can discover, without any additional PC connection, the powerful capabilities of the ATA542x series when partnered with Atmel's ATmega3290.
The Wireless Blackbird evaluation kit is available in 5 different versions as designated by the following part numbers:
ATAB5423-3-WB for 315 MHz
ATAB5425-3-WB for 345 MHz
ATAB5428-4-WB for 434 MHz
ATAB5428-8-WB for 868 MHz
ATAB5429-9-WB for 915 MHz |
|
ATAB5428-8-WB
|
The Wireless BlackBird evaluation kit consists of two 2"x3.5" PC boards, each with one ATA542x transceiver, custom LCD display, external antenna, ISP and UART headers, miniature joystick, and 2 AA batteries. Using the two transceiver boards, a communication link can be established within seconds to easily demonstrate functions such as RSSI links, temperature and light sensoring, and frequency hopping.
The ATAB542x-x-WB kit is designed for an immediate out-of-the-box experience. Industrial or consumer system designers can discover, without any additional PC connection, the powerful capabilities of the ATA542x series when partnered with Atmel's ATmega3290.
The Wireless Blackbird evaluation kit is available in 5 different versions as designated by the following part numbers:
ATAB5423-3-WB for 315 MHz
ATAB5425-3-WB for 345 MHz
ATAB5428-4-WB for 434 MHz
ATAB5428-8-WB for 868 MHz
ATAB5429-9-WB for 915 MHz |
|
ATAB5429-9-WB
|
The Wireless BlackBird evaluation kit consists of two 2"x3.5" PC boards, each with one ATA542x transceiver, custom LCD display, external antenna, ISP and UART headers, miniature joystick, and 2 AA batteries. Using the two transceiver boards, a communication link can be established within seconds to easily demonstrate functions such as RSSI links, temperature and light sensoring, and frequency hopping.
The ATAB542x-x-WB kit is designed for an immediate out-of-the-box experience. Industrial or consumer system designers can discover, without any additional PC connection, the powerful capabilities of the ATA542x series when partnered with Atmel's ATmega3290.
The Wireless Blackbird evaluation kit is available in 5 different versions as designated by the following part numbers:
ATAB5423-3-WB for 315 MHz
ATAB5425-3-WB for 345 MHz
ATAB5428-4-WB for 434 MHz
ATAB5428-8-WB for 868 MHz
ATAB5429-9-WB for 915 MHz |
|
ATAKSTK511
|
This kit contains a functional standalone UHF radio system consisting of a Transmitter (Attiny13 + ATA8401/2/3), Receiver (ATA8201/2/3/4/5), and Interface Board. The Interface Board provides a quick, one-step programming tool to configure Atmel RF receivers OR doubles as an expansion card for the STK500 (not included in kit) to allow development of software for receiver applications using any of the AVR microcontrollers supported by the STK500. The STK511 Starter Kit is available in 4 different versions covering 315 MHz, 434 MHz, 868 MHz, and 915 MHz as designated by the part number suffix –3, -4, -8, -9 respectively. |
|
ATASTK512-EK1/EK2/EK3-IND
|
Starter kits for operating frequencies of 315MHz, 433MHz and 868MHz to evaluate a complete RF link. Besides the ATA8741/42/43 transmitter, these kits include a receiver board equipped with ATA8203/04/05 plus an ATmega88 AVR microcontroller and feature a secure rolling code transmission algorithm. That algorithm uses the Advanced Encryption Standard (AES) which is particularly useful for security applications like alarm systems. |
|
ATR2406-DEV-KIT
|
The ATR2406-DEV-KIT is a complete development kit and comes completely pre-configured and allows both demonstration and RF-testing capabilities for the ATR2406 Low-IF 2.4Ghz ISM Transceiver.
Hardware Overview
The Evaluation-Kit consists of 2 RF-Modules ATR2406-DEV-BOARD, 2 Interface-Boards Flamingo, 2 Battery-Boards, Set of Rechargeable AA Batteries and 1 CD-ROM with Firmware and Manufacturing Data (Gerber-Files)
|
|
ATR2406-DEV-KIT2
|
The ATR2406-DEV-KIT2 is a complete evaluation kit and comes completely pre-configured and allows both demonstration and RF-testing capabilities for the ATR2406. The Kit also features a example-design with the ATmega88 Flash Microcontroller and offers a powerful adaptive frequency hopping firmware.
Hardware Overview: The Evaluation-Kit consists of 2 boards ATR2406/Atmega88, 2 Battery-Packs, Set of AAA Batteries, CD-ROM with Firmware and Manufacturing Data (Gerber-Files) |
| Software Files: |
| Software |
Description |
|
ATR2406-DEV-BOARD - Manufacturing Data
(861 KB, updated 08/05)
Complete Manufacturing Data inclusive Gerber-Files, Bill-of-Material and PCB-Specification |
|
|
ATR2406-DEV-BOARD2 - Manufacturing Data
(555 KB, updated 11/05)
Complete Manufacturing Data inclusive Gerber-Files, Bill-of-Material and PCB-Specification |
|
|
ATR2406-DEV-KIT - Firmware
(166 KB, updated 05/05)
Smart RF Source-code Template for ATmega 16 |
|
|
ATR2406-DEV-KIT2 - Firmware
(292 KB, updated 05/05)
Smart RF Adaptive Frequency Hopping Spread Spectrum (AFHSS) Source-Code for ATmega88 |
|
RF Design Kit Software
(3 MB, updated 12/05)
The RF Design Kit software forms the PC-based Graphical User Interface for the RF Design Kit as well as for the Flamingo RF Design Kit. The RF Design Kit software is used to configure the RF transmitter and receiver. Parameters such as baud rate, modulation scheme, etc. can easily and quickly be changed. Software tools to evaluate the received data are also provided. |
|
|
Smart RF EVENTASY
(343 KB, updated 12/07)
- Event-driven, asynchronous low speed communication
- Human-Interfacing type applications like Mice & Keyboards |
|
|
Smart RF SPI2RF
(312 KB, updated 12/07)
- Firmware to support simple SPI commands
- Synchronous based on AFHSS
|
|
|
SPI Controller v1.3
(184 KB, updated 03/04)
Software tool that allows evaluation of AT86RF401 RF performance without requiring the user to write code. Also allows the program and data memory of the AT86RF401 to be written/read with the same utility. |
|
|
STK512 Hardware Information
(1 MB, updated 10/09)
Includes Schematics, Gerber files and BOM |
| Top |
| |
|
|
Touch Solutions
