| Development Kit |
|
|
|
ATA6823-DK
|
ATA6823 H bridge DC Motor Control. The development kit contains the main board with the H-bridge Gate Driver ATA6823, external FETs and a DC motor. The controller boards is populated with a microcontroller ATmega88 and a LCD display. |
|
ATA6824-DK
|
ATA6824 High Temperature H bridge DC Motor Control. The development board contains the H-bridge Gate Driver ATA6824, external FETs, and the microcontroller ATmega88 provides the speed signal. On the board there are only populated high temperature components. |
|
ATA6826-DK
|
PC-controlled application board for ATA6826 or T6818. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATA6827-DK
|
PC-controlled application board for ATA6827. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATA6831-DK
|
PC-controlled application board for ATA6831 and compatible high temperature device ATA6832. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATA6832-DK
|
ATA6831/ATA6832 Fully integrated BLDC Motor Control from the Signal Generation to the Full BLDC Motor Control Chain. The development board contains the triple half bridge driver ATA6832, the microcontroller ATmega88, and the LIN SBC ATA6625 works as a voltage regulator. On the board there are only populated high temperature components. The design kit includes also the BLDC motor and a power supply cable with banana plugs. |
|
ATA6836-DK
|
PC-controlled application board for ATA6837/ATA6838/ATA6839 in the QFN5x5 package. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATAB6816
|
PC-controlled application board for ATA6836, U6815M or T6816. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATAB6817
|
PC-controlled application board for T6817. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATAB6818
|
PC-controlled application board for T6818. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
|
ATAB6819
|
PC-controlled application board for T6819. Using the application board, loads can easily be adapted via row connector pins. The design software controls the application board's SPI interface via the PC parallel port. The design kits also include everything else needed to start operation: a link cable to PC 25-lead 1:1, the corresponding application note and datasheet. |
| Software Files: |
| Software |
Description |
|
ATA6824-DK Design Kit Software incl. Source Code
(285 KB, updated 5/07)
|
|
|
ATA6826/ATA6827 PC User Interface Software
(3 MB, updated 5/07)
|
|
|
ATA6831/ATA6832 PC User Interface Software
(3 MB, updated 11/07)
|
|
|
ATA6832-DK Design Kit Software incl. Source Code
(247 KB, updated 2/07)
|
|
|
ATA6836 PC User Interface Software
(3 MB, updated 12/06)
|
|
|
ATAB6816 PC User Interface Software
(5 MB, updated 11/05)
|
|
|
ATAB6817 PC User Interface Software
(3 MB, updated 6/05)
|
|
|
ATAB6818 PC User Interface Software
(3 MB, updated 6/05)
|
|
|
ATAB6819 PC User Interface Software
(3 MB, updated 6/05)
|
|
|
U6815BM PC User Interface Software
(492 KB, updated 6/05)
|
| Top |
| |
Touch Solutions
