Tire Pressure Monitoring - |
|
|
|
|
| Development Board |
|
|
|
ATAB5276
|
LF Antenna Driver Board ATAB5276
Used for cost efficient and simple LF wakeup applications. The board includes the antenna module and DC supply power cable. To create the ATAK5276-83 demonstrator the microcontroller baseboard ATAB-LFMB-76 and LF receiver ATAB5283 are also needed. Referred documents:
Board Ordering List,
ATAK5276-83,
ATAB-LFMB-76,
ATAB5283. |
|
ATAB5283
|
One Channel LF Receiver Board ATAB5283
Intended to demonstrate 1D-channel wakeup functionality. Reception is indicated by LED Typically used for TPM wakeup application.
Referred documents:
Board Ordering List,
ATAK5276-83 |
|
ATAB-LFMB-76
|
Micrcontroller Baseboard ATAB-LFMB-76
Controlling the patched on 125 kHz transmitter board ATAB5276 and also to maintain communication with host via RS232 interface.
The ATAB-LFMB-76 is equipped with a flash microcontroller Atmega8515 containing the specific firmware therefore. The cables for the RS232 interface, DC power and CD-ROM with software and documentation are also added.
To customize your kit, see the Selection Guide,
ATAK5276-83 |
| Top |
| Development Kit |
|
|
|
ATAK5276-83
|
1-channel LF Wake-up Demonstrator Kit ATAK5276-83
The LF wake-up demonstrator is provided to demonstrate the performance of a 1D LF wake-up channel, mainly needed for battery-driven systems. Typical wake-up applications can be found in vehicles for tire pressure monitoring systems (TPMS).
To create the kit, the following components have to be ordered separately: AVR®base board ATAB-LFMB-76, Antenna driver interface ATAB5276, LF-receiver/indicator ATAB5283(1)
(1) For TPMS target applications the LF receiver ATA5283 is substituted by TPM control IC ATA6285/ATA6286 with integrated LF receiver. |
|
ATAPMxx Automotive Development Kit
|
The ATAPMxx automotive development kit is a modular, flexible application system to support customers efficiently in developing and evaluating their application within one single environment. The tool will be continuously extended with new devices, allowing to create a broad range of different configurations to meet individual application’s demands. Starter kits are available to realize typical applications such as a complete RKE or PEG system for the car and the key side. Other target applications include LIN networking or LF-RFID.
ATAPMxx consists of a main board, to which various application boards and daughter boards can be connected. The main board includes AVR system controller, LCD display and touch screen, USB interface for PC connection, two-wire-serial bus as connector, SD card slot, power supply connector and a beeper. This board is able to manage and control a complete application with different application and daughter boards as stand-alone system. |
| Top |
| |
|
|
Touch Solutions
