| Company Name |
Description |
Contact Information |
| ADM Designs LLC |
Employees: 1-3
AVR experts: 1-3 |
Yvon Dubois
info@adm-designs.com
1018 Avocado Ave.
Escondido, CA 92026
Tel: +1 (619) 906-7754 |
From the idea to the final Product in Industrial and Consumer Electronics.
Full range of product development services:
- Analog, digital circuit design
- AVR, ARM and other microprocessor software in C, Pascal and assembly language
- FPGA design using VHDL or Verilog (Xilinx, Lattice, Altera, Quicklogic)
- PCB Layout
|
| ApT Consultants, Inc. |
Employees: 1-3
AVR experts: 1-3 |
Tom Guadagnola
tomg2@aptconsultants.com
1547 Vista Grande Rd.
El Cajon, CA 92019
Tel: +1 (619) 579-6916 |
ApT Consultants, Incorporated is a US-based company founded in 1981 to provide product development and design services. We specialize in microcontrollers and are experienced in firmware/software (C, Assembly, Visual C, Visual Basic, C#), analog and digital circuit design, CPLD/FPGA design, mechanical design, printed circuit board design and packaging. We have completed 4-bit, 8-bit, 16-bit and 32-bit MCU designs using Atmel AVR and 8051, Texas Instruments MSP430, Microchip PIC, Renesas, Silicon Labs, Philips, Dallas, Epson and Samsung microcontrollers.
Product areas:
- Low Power (battery)
- Consumer
- Medical
- Industrial
- Military
- Data Acquisition
- Machine Controls
- Navigation Equipment
- Communications
- Automotive Test Equipment
- Disk/Tape Drives
|
| Computer Solutions |
Employees: 4-9
AVR experts: 1-3 |
George Jerome
george@ecoology.com
9565 Vassar Ave, Chatsworth, CA 91311
Tel: +1 (818) 407-1235
Fax: +1 (818) 998-2665 |
| Flexible solutions to control problems utilizing in-circuit programmable Atmel AVR microprocessors for industrial, aviation, medical, and commercial applications. Sensor inputs, analog inputs, digital interface, inter-device communications, high-level language programming, as well as assembly coding for tight, fast program execution. Experience with UL, FAA, and FCC regulatory agencies. More than 35 years of hands-on design experience. Design and development of new products, fault-finding and correction of existing products, and function enhancement of otherwise obsolete devices. Capabilities include hardware design, software development, packaging, PCB design, and prototype assembly. In-house machine shop. Experienced in Industrial controls, aviation related systems, medical, telephone, energy conservation, inspection, HVAC controls, environmental systems, machine tools, and manufacturing machines. |
| Digital Systems Associates, Inc. |
Employees: 4-9
AVR experts: 4-9 |
David Switzer
dkswitzer@dsanet.com
11401 La Vereda Dr.
Suite 200
Santa Ana, CA 92705-7405
Tel: +1 (714) 838-2495
Fax: +1 (714) 838-2497 |
DSAI has a 20-year track record providing embedded systems development and consulting services to commercial, industrial, and governmental clients. Building on a core team of senior personnel with demonstrated capabilities, DSAI is able to provide system design consulting services as well as hardware, firmware and software contract development services in a variety of application areas including:
- Real-time embedded systems
- Monitoring and control
- Peripheral device and controller firmware (disk, tape, data communications, networking)
- Device drivers
- Instrumentation and test equipment
- Data communications
- Protocol stacks
- Windows API and .NET, MS-DOS and Embedded Linux test and application programs
|
| Gordon Minns & Associates |
Employees: 1-3
AVR experts: 1-3 |
Gordon Minns, Ph.D.
gminns@minns.com
29039 North 59th Street
Cave Creek, AZ 85331
Tel: +1 (480) 215-1340
Fax: +1 (480) 991-2393 |
Turn-Key Product Design Solutions in Medical/Dental, Industrial, and Consumer Electronics.
Full range of product development services:
- Analog, sensor, digital circuit design
- AVR and other microprocessor software in C and assembly language
- Industrial Design using 3D software, Tooling and Packaging
- FDA, CE, UL , FCC and other regulatory agency approvals
- Sub-systems and enhancements for new and existing products
Experience in:
- Medical/Dental products, including life support systems, Automated test fixtures
- Digital Audio/Video, Sensors and Data Logging, Ethernet-based remote control and monitoring
- Industrial, machine tool, and HVAC controllers
|
| Gottlieb Inventions, Inc. |
|
Joseph Gottlieb
ginvent@pacbell.net
1305 Simpson Wy.
Suite G
Escondido, CA 92029
Tel:+1 (760) 743-2006
Fax:+1 (760) 743-2006 |
| Gottlieb Inventions, Inc. is a product manufacturer as well as design consultant. We have expertise in analog, digital, RF, PCB, and control system design. From quick, low cost designs to complex integrated systems, we run the full range of capabilities. We handle software, hardware, and pcb design for atmel AVR microcontrollers. |
| JTZ Engineering |
Employees: 1-3
AVR experts: 1-3 |
John T. Zigrang
jtz@jtzeng.com2462 W. 230th St.
Torrance, CA 90501
Tel: +1 (310) 534-8559
Fax: +1 (310) 534-1084 |
Even though we are located in Southern California, JTZ works with companies all over the world. Established in 1985, JTZ Engineering, Inc. is a full time design company actively involved in consumer and industrial product development specializing in the Security Industry, Printer Controllers, Test Environment Support and Control Subsystems. We have been working successfully with AVR controllers since 1999.
Recent experience includes:
- Aircraft system tester
- Access Control Systems for the Safe and Banking industries
- Communications interfaces for data conversion and collection
- Battery operated devices for multi-year operation
- Fuel control subsystems
- Real Time audio control system
- Inspection Equipment controller
- Dallas TAG devices for security applications
- DC/DC converters, Step Up or Step Down
Our designs have been produced at production levels of 3000 a week, to 100 a year. Whatever the size of your project, JTZ can assist in getting your ideas to market. We also have experience with very large project and have a number of associates that can be called in if needed. At JTZ we are able to do full product development including system design, layout and packaging, with surface mount designs as a specialty. We also provide services for low volume production and management of contract manufacturing for our designs. JTZ has also set up in-house manufacturing for clients just starting in electronic products.
Project outlines and/or design requirements can be emailed to jtz@jtzeng.com for quoting. Or you can start by contacting Kaye for more information on JTZ and to set up an appointment. |
| Laritech, Inc. |
Employees: 40-60
AVR experts: 1-3 |
Bill Larrick
bill.larrick@laritech.com
330 Zachary St.
#102
Moorpark, CA 93021
Tel: +1 (805) 529-5000
Fax: +1 (805) 529-5151 |
| Laritech, Inc. was founded in 1995 as an engineer-friendly design and manufacturing company. We specialize in embedded control particularly in the CAN bus protocol. We also serve the embedded control market in Ethernet, Serial and GPIB interface implementations. Laritech has the ability to design hardware, write firmware, layout PCBs, build prototypes, small and medium volume production boards, and do final board testing. We are ISO 9001:2008 certified and our procedures are thorough. We have over 500 completed AVR designs to date. See our website for more information.
|
| Logic Edge, Inc. |
Employees: 1-3
AVR experts: 1-3 |
Eric Sornborger
eric@logicedge.com
7310 W. 82nd St.
Los Angeles, CA 90045
Tel: +1 (310) 855-3946 |
- Embedded system design and development
- Video scaling and processing
- LCD display controller design
- FPGA design and development
|
| Logical Approach Engineering |
Employees: 10-20
AVR experts: 1-3 |
John Milligan
jm@lae.com
900 Calle Plano
Unit A
Camarillo, CA 93012
Tel: +1 (805) 987-8274
Fax: +1 (805) 987-8279 |
| Incorporated in 1990, Logical Approach Engineering (LAE) specializes in microcontroller systems embedded into product applications. LAE provides full product-development life cycle from product specification through design, PCB layout, prototyping, and product sell-off. LAE provides full hardware development services including design and simulation, schematic capture, prototyping and small production runs. LAE excels in battery powered embedded applications, especially where low analog noise is a concern. LAE offers full software development services from requirements definition and documented software design, through integration of hardware and software. As a part of the development process, LAE is committed to software documentation and the use of the high-level language "C" to provide a maintainable environment. If you would like LAE to help you with The Logical Approach, give us a call or drop us an email. |
| Raztek Solutions, Inc. |
Employees: 1-3
AVR experts: 1-3 |
Yair Raz
info@raztek-inc.com
1575 Lewiston Dr.
Sunnyvale CA 94087
Tel: +1 (408) 499-7025
Fax: +1 (408) 746-2806 |
| We have proven knowledge and expertise developing embedded systems using wide range of processor and DSP architectures (AVR, ARM, proprietary cores), using various RTOS and Embedded Linux. We also have unique knowledge and experience providing embedded Java solutions. |
| SoftwareFlair Inc. |
Employees: 4-9
AVR experts: 1-3 |
Floyd Goldtsein
floydg@softwareflair.com
17720 Retrac Way
Grass Valley, CA 95949
Tel: +1 (530) 268-3809
Fax: +1 (530) 268-8361 |
| Software/Hardware Design Consultants: Embedded systems, Firmware, RTOS, Device Drivers, FPGAs. |
| Swope Designs, Inc. |
Employees: 1-3
AVR experts: 1-3 |
John Swope
john@swopedesigns.com
1222 Research Park Dr. Davis, CA 95618
Tel: +1 (530) 756-6191 x26
Fax: +1 (530) 756-5179 |
Complete Turn-Key system design, prototype development, and testing services.
SDI has expertise in the following:
- All major uC platforms including Atmel AVR
- 8-, 16-, and 32-bit microcontrollers (both hardware and software)
- PSoC (Programmable System on a Chip)
- UAV Flight systems
- Aircraft Stability Control Systems
- Real-time Control Systems (PID, Fuzzy Logic, Non-linear)
- Analog design, (Sensor interfacing & filtering, power conversion, and more)
- Both analog and digital (DSP) filtering techniques
- High-speed digital design
- Motor control
- Networked embedded systems (I2C, CAN, etc.)
- Schematic Capture/ Layout
- Robotics systems design, AI algorithms
- Mechatronics
- Mechanical part design (CAD based)
- In-house CNC prototyping capabilities
- Design for reliability
- Robust system testing (Electrical and environmental margin testing)
- Failure Root Cause Analysis (RCA) techniques
|
| Two Point Seven Inc. |
Employees: 1-3
AVR experts: 1-3 |
Colin Stanley
colin@twopointseven.com
17814 Greyhawk Pl.
Granada Hills, CA 91344
Tel: +1 (818) 804-5290
Fax: +1 (818) 804-5307 |
| Two Point Seven Inc. provides consulting and engineering services to end users or OEM's. We have over 25 years of experience in the electronic and computer fields, ranging from telecommunication, video, image processing, computer graphics, printing, IT, and industrial control systems. We have been involved in the design and manufacture of pre-press color imaging workstations, printer controllers, network systems, motor controllers, video processing, and multimedia display kiosks. We pride ourselves in providing personalize service before, during and after any design development. |
| Vecur Wireless, Inc. |
Employees: 1-3
AVR experts: 1-3 |
Tapio Vahamaki
tapio@vecur.com
11315 Rancho Bernardo Rd.
Suite 134
San Diego, CA 92127
Tel: +1 (858) 336-3063
Fax: +1 (866) 705-0762 |
| For 19 years, developing embedded applications specializing in transforming an idea into a product that you can touch and feel. Vecur develops proof-of-concept devices, by designing the microprocessor hardware, digital i/o, analog, and software in a cost and time effective approach. Some of the embedded systems developed: printers, POS, smart card reader, wireless shipping sensor and alarm systems. Programming in C and assembler. Industry areas include: automotive, industrial controls, consumer wireless. Vecur also will help trouble shoot a product, to correct problems, add legacy enhancements, and create a new product design for a particular need. Digital or analog interfaces can be matched with incompatible equipment or devices, typically in industrial control applications, by designing an interface translation device. |
